Lift LCS Folding Glide Propeller

The LCS Folding Glide Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Glide runs its own blade geometry, sized and pitched for efficiency and glide. Blades measure 1.25 inches at the widest section, the narrowest profile in Lift's folding line, with 5.6 inches of pitch on a 6 inch diameter. The profile folds flat against the hub the moment the motor cuts. It ships standard on every 55mm propulsion and runs on any 68mm motor with the LCS Base Plate and LCS Tail Cone installed. Construction is aluminum with stainless steel inserts.

Product Material: 

• Aluminum with stainless steel inserts
• Blade Pitch: 5.6" (142 mm)
• Blade Diameter: 6" (152 mm)
• Blade Width (widest section): 1.25" (32 mm)

Compatibility:

• 55mm Motor (native)
• 68mm Motor (with kit)

LCS Propeller Installation Guide

⚠️ IMPORTANT: It is critical all eFoil equipment is turned off and the battery is disconnected before working with or around the motor or propellers.

• Avoid contact with the spinning propeller, as it can cause severe injury or death.
• Keep your fingers, toes, and body parts clear of the propeller at all times.
• Do not handle the propeller while the battery is installed in the board.
• Do not handle your propeller in the water.